Item # bci2029396
Little Giant 10ENH 60 GPM 115V High Head Fully Submersible Effluent Pump with 30' Cord
Model: 511574
from the 10ENH Collection
$1,086.80
Finish: Choose Finish
- N/A$1,086.80Special Order
Free Shipping!
Product Overview
The Little Giant 10EN Series pumps feature 1/2 HP permanent split capacitor (PSC) motors providing lower current draw, energy efficiency, improved performance and cooler running for durability. In addition to a stainless intake plate, the 10EN also features a cast iron cover on the manual and RF (remote float switch) versions.
Product Features:- 1/2 Horse Power with overload protection
- New cooler running motor which extends the life of the pump
- Designed for continuous duty
- Covered by 12 month limited warranty
- Handles 3/4" solids
- Cover made from: Cast iron
- Housing made from: Cast iron
- Impeller Type: Non-clog
- Impeller made from: Thermoplastic
- Switch Type: Mechanical float
- Single phase operation
- 30' Cord included
- 1/2 Horse Power
- Voltage: 115V
- 9.5 Amp maximum operation
- 1-1/2" Discharge diameter
- Length: 9-1/2"
- Width: 6-3/4"
- Height: 11"
- Flow rates (GPH: gallons-per-hour):
- At 5 feet of head: 60
- At 10 feet of head: 50
- At 20 feet of head: 40
- At 30 feet of head: 30
- At 40 feet of head: 15
Additional Little Giant Links
Manufacturer Resources
Dimensions and Measurements
Cord Length
360 in.
Discharge Diameter
1.5 in.
Flow Rate (GPM)
60
Height
11.03 in.
Length
9.53 in.
Maximum Diameter Solids
.75 in.
Maximum Head Height
60 in.
Minimum Head Height
5 in.
Water Connection
1-1/2"
Water Pressure (Max)
26 PSI
Width
6.74 in.
Characteristics and Features
Impeller Material
Thermoplastic
Material
Cast Iron
Material Casing
Iron
Material Housing
Iron
Material Shaft
Nitrile
Switch Type
Float
Water Connection Type
NPT
Electrical and Operational Information
Amperage
9.5
Electrical Phases
1
Horsepower
.5
Maximum Fluid Temperature
140 °F
Voltage
115
Wattage
1045
Warranty and Product Information
Approved for Commercial Use
Yes